Simply the best data, in a single trail

ADS-B Fusion brings higher-fidelity tracking to your operation by adding ADS-B alongside the satellite and cellular data already coming from your device - combined into one continuous trail in TracPlus Cloud.

No switching. No reconciling. No new aircraft hardware required. 

Free to trial on selected aircraft, for a limited time - Request a Free Audit.
More sources. More often.
ADS-B is added to your existing satellite and cellular tracking and combined into one trusted trail. Where ADS-B coverage is available, it contributes more frequent, higher-resolution position data - giving you a second, independent source and a more detailed picture of every flight.
ADS-B Fusion Live Tracking Trail Illustration-1
When ADS-B is available

In ADS-B airspace, TracPlus:

  • Adds high-frequency ADS-B data to the trail for more frequent, more specific updates
  • Delivers dense, high-resolution trails showing every turn, circuit and drop run - around six times as many position reports
  • Provides an extra source of position data, adding redundancy and resilience to tracking
Result: the most detailed trail available, drawing on an additional high-frequency source.
When ADS-B is not available

In cellular coverage, TracPlus:

  • Continues tracking via cellular and satellite, with ADS-B added where available
  • Brings all sources together into one continuous trail
  • Maintains redundancy through multiple simultaneous sources of position data

Result: consistent updates from more than one source, combined into a single picture.

When out of ADS-B & cellular

In remote locations, TracPlus:

  • Continuously tracks via satellite, maintaining a trusted trail as the backbone feed
    Keeps satellite as the primary source where no other coverage exists
    Adds ADS-B and cellular back into the trail automatically wherever coverage returns

Result: reliable long-range coverage with no operational blind spots - no platform switching, no reconciling.

In fast-moving missions, uncertainty costs time.

A safety-critical system, with built-in redundancy

Tracking is a safety-critical system. ADS-B Fusion strengthens it by adding a second, independent source of position data - so if satellite or cellular drops out, you still have a trail to rely on. It delivers:
  • A second, independent source of position data, adding redundancy to tracking
  • More accurate geofence-crossing and intrusion detection
  • Easier identification of potentially high-risk manoeuvres during review
  • Better situational awareness for the ops centre and incident command
  • Clearer, more detailed reviews during incidents and after-action learning
When every second counts, “close enough” tracking isn’t good enough. A lot can happen between satellite pings - higher-frequency updates where ADS-B coverage exists mean an incident that would sit invisible between two-minute pings becomes visible far sooner.
Aerial fire fighting ADS-B Fusion

One trusted picture for complex operations

TracPlus is built for teams that need more than guesswork:

  • Aerial firefighting and utility operators
  • Emergency, SAR and EMS agencies
  • Multi-agency missions and mixed fleets
  • Organisations coordinating ground, aviation and support assets

Everyone from the ops centre to incident command sees the same clear picture, refreshed as often as the mission demands.

Exclusive to TracPlus

The only ADS-B Fusion system

TracPlus is the only provider that:

Integrates ADS-B, satellite and cellular into one continuous trail in the cloud

Adds a second, independent source of position data for greater redundancy

Works with your existing satellite tracking devices - no aircraft hardware upgrade required

Goes beyond standard tracking to provide a smarter, more resilient operational backbone

Let’s talk about your set-up

Give us your details and we’ll show you how ADS-B Fusion can add accuracy, redundancy and situational awareness to your existing TracPlus environment - without changing your aircraft hardware.

Free to trial on selected aircraft, for a limited time - Request a Free Audit.

FAQs

Do we need to replace our existing aircraft hardware?
No. ADS-B Fusion works with your existing satellite tracking device and ADS-B transponder.

How does this improve safety and redundancy?
By adding ADS-B as a second, independent source alongside satellite and cellular, you get more frequent updates where coverage exists and a backup source if one signal drops out - making tracking, a safety-critical system, more resilient.

Is TracPlus the only one offering this?
Yes. TracPlus is the only provider that integrates ADS-B, satellite and cellular into a single continuous trail in the cloud - adding another source of tracking data with no aircraft hardware upgrade required.

Do we need multiple systems for different feeds?
No. TracPlus brings all sources together automatically in the cloud - one trail, one system.

Mission OS - not just tracking

TracPlus Cloud is more than a map.

It’s a mission operating environment bringing together; Live tracking, events and activity data, Messaging and communications, After-action learning, Fleet-wide insights.

Your operational truth lives in one place - from planning to shutdown.

Learn more